Consumer units
Condition, accessibility, circuit protection, labelling, enclosure integrity and suitability of protective devices.
Professional Electrical Installation Condition Reports for landlords, homeowners, HMOs, managing agents and commercial premises across London and the South East.
An Electrical Installation Condition Report, usually shortened to EICR, is produced after the fixed electrical installation has been inspected and tested by a competent electrical professional. It is also commonly referred to online as an Electrical Safety Certificate, an electrical inspection certificate or a fixed wire test.
The purpose of an EICR is to establish whether the installation is safe for continued use and to identify defects, deterioration, damage or non-compliances that may require further investigation or remedial work.
The inspection focuses on the permanent electrical installation rather than portable appliances. It can include consumer units, distribution boards, final circuits, sockets, lighting, protective devices, earthing, bonding and fixed electrical equipment forming part of the installation.
The scope is agreed according to the property, installation and reason for the inspection. Accessible parts of the fixed wiring system are then visually examined and electrically tested.
Condition, accessibility, circuit protection, labelling, enclosure integrity and suitability of protective devices.
Earthing arrangements, protective conductors and main protective bonding are assessed as part of the safety inspection.
Representative accessories, sockets, switches, lighting points and fixed equipment are inspected where accessible.
Appropriate dead and live tests are carried out to assess circuit continuity, insulation, polarity and fault protection.
Signs of overheating, damage, unsafe alterations, inadequate protection and other potential electrical hazards are recorded.
The completed report records test results, observations, classification codes and the overall outcome of the inspection.
Landlords need clear, dependable electrical safety documentation for their properties. We provide EICRs for individual rental homes, portfolios, HMOs, managed blocks and communal areas.
In England, rented homes are generally required to have the electrical installation inspected and tested by a qualified person at least every five years, or sooner where the previous report specifies an earlier date. The resulting report records whether the installation is satisfactory and identifies any investigative or remedial work required.
View landlord EICR services →Commercial electrical installations can contain multiple distribution boards, three-phase supplies, specialist equipment and circuits serving essential business operations. The inspection must therefore be planned around the building, occupancy and operational requirements.
We carry out commercial EICRs for offices, shops, restaurants, warehouses, schools, care settings, hospitality premises and other workplaces across London and the South East.
View commercial EICR services →An EICR combines visual inspection, safe isolation, electrical testing, assessment of results and preparation of the final condition report.
We confirm the property type, access arrangements, occupancy and any circuits or operational areas that require special planning.
Accessible parts of the installation are checked for damage, deterioration, overheating, unsuitable equipment and unsafe alterations.
Circuits are isolated where required and appropriate test procedures are completed before live verification and protective-device testing.
Results are assessed, observations are classified and the digital EICR is issued with a satisfactory or unsatisfactory outcome.
Our dedicated guide explains the inspection sequence in greater detail, including visual checks, safe isolation, dead testing, live testing, sampling, classification codes and what happens after the report is issued.
View the EICR test procedureObservations are classified according to the level of electrical safety concern. The code helps explain whether immediate action, remedial work, further investigation or improvement is recommended.
A dangerous condition presenting a risk of injury. Immediate action is required and the inspector may need to make the danger safe before leaving.
A defect that may not present immediate danger but could become dangerous under fault conditions or reasonably foreseeable use.
An issue that cannot be fully determined during the inspection and needs further investigation without delay to establish whether danger exists.
The installation could be improved, but the observation does not by itself make the EICR unsatisfactory or require remedial work for that outcome.
An unsatisfactory report does not mean that the complete electrical installation needs replacing. It means that one or more observations require remedial action or further investigation before the installation can be regarded as satisfactory for continued use.
BIM Safety Group can review the report, explain each observation in plain language and provide a quotation for the work required. Once completed, the relevant electrical certification is issued for the remedial work.
View EICR remedial worksUseful answers about Electrical Installation Condition Reports, Electrical Safety Certificates and the inspection process.
Electrical Safety Certificate is a common search term used for an Electrical Installation Condition Report. The formal document produced after periodic inspection and testing is normally called an EICR.
The recommended interval depends on the type and use of the installation, its condition and any previous report. Rented homes in England are generally required to be inspected at least every five years, or sooner where the previous report specifies an earlier date.
A typical domestic EICR often takes several hours. Larger homes, HMOs and commercial premises can take longer because there are more circuits, distribution boards and areas to inspect and test.
Yes. Parts of the installation normally need to be safely isolated while dead testing is carried out. We plan the inspection to reduce disruption and explain any required shutdowns before testing begins.
An EICR is normally recorded as unsatisfactory when the inspection identifies a C1, C2 or FI observation. C3 observations are recommendations for improvement and do not by themselves make the report unsatisfactory.
Yes. We can review the observations, provide a clear quotation and complete the required electrical remedial works. Appropriate certification is issued for the work completed.
Tell us the property type, location, number of bedrooms or approximate size, occupancy and whether the EICR is for a landlord, homeowner, managing agent or commercial business.
Send the job details below and our team will get back to you.
Request a quotation for a domestic, landlord, HMO or commercial electrical inspection.